FAQ

What's the difference between One-KVM and PiKVM?

One-KVM is developed based on PiKVM with localization and many extensions, supporting more hardware and platforms.

For advanced configuration, refer to the PiKVM documentation, which covers advanced features in depth.

Software

What ports does One-KVM use?

The integrated image listens on port 443 by default; visiting 80 will redirect to 443. The Docker version listens on port 4430 by default; visiting 8080 redirects to 4430.

Since the SSL certificate is self-signed, browsers will mark it untrusted. You may ignore the warning or replace the NGINX SSL certificate.

Tip

Initial WEB and VNC credentials are admin/admin. The root password is usually set by users; if not set, try 1234.
ssh default port: 22
vnc default port: 5900
janus ws ports: 20000-40000

Tip

Troubleshooting:
No Signal on the web page — check hardware connections;
Black screen or colored bars — verify HDMI input from the target machine;<br+ BIOS screen abnormal — try enabling CSM in BIOS;
Virtual mouse offset/range issues — switch to relative mouse mode from the top-right menu;
Intermittent black screens after refresh — try Firefox;
If none of the above helps, reboot the system; if the issue persists, open a GitHub issue or join the One-KVM group.
How to access One-KVM from the Internet?

If your router has a public IP, map and forward port 443 (integrated image) or 4430 (Docker). Otherwise, use NAT traversal or mesh networking services like Tailscale or FRP.

How to change the WEB login username/password?

Note: For integrated images, you can log in as root via HDMI or SSH. The web terminal (kvmd-webterm) is a low-privilege account without a password; it has no root privileges and cannot use sudo. To run privileged commands, run su root and enter the password.

Example: change credentials

# Switch to root
su root

# Add a user (replace `silentwind` with your username)
# Older versions use the `set` command; newer releases use `add`
#kvmd-htpasswd set silentwind
kvmd-htpasswd add silentwind
# Enter password when prompted

# Delete a user
kvmd-htpasswd del admin
# List all users
kvmd-htpasswd list
# Restart services to apply changes
systemctl restart kvmd kvmd-nginx

How to change the WEB service ports?

Edit /etc/kvmd/override.yaml to change HTTP/HTTPS ports (443 is the default for the web UI). After editing, run systemctl restart kvmd-nginx to apply.

Video

Why are there unavoidable black bars around the video?

Check your target system settings. Adjusting the target's resolution to match the web UI may help.
BIOS/UEFI display issues or wrong resolution?

Some motherboards display BIOS at a low resolution or with rendering issues. This can often be resolved by enabling Compatibility Support Module (CSM) in BIOS. See the video tutorial below (excerpt from Bilibili: 喵喵折-痛失网名版):

If you cannot or do not want to enable CSM, try connecting a DisplayPort (DP) monitor or dummy plug. If that still doesn't work, try: connect DP cable, boot to BIOS, disable CSM and shut down (do not reboot). Then boot to BIOS again, enable CSM, shut down, connect HDMI, and power on again.

System

How to set a static IP?

Use the TUI tools nmtui or armbian-config.

How to change the MAC address?

Non-OneCloud devices: use nmtui.

OneCloud has special constraints and cannot use nmtui directly (doing so may prevent DHCP). Methods differ by version:

Version 240118 and later

Edit /etc/systemd/network/99-eth0.network to set the MAC.

Version 240138 to 240104

# Replace NetworkManager with systemd-networkd
echo -e '[Match]\nName=eth0\n\n[Network]\nDHCP=yes\n\n[Link]\nMACAddress=2a:01:3d:ef:b8:e1' > /etc/systemd/network/99-eth0.network
systemctl mask NetworkManager
systemctl unmask systemd-networkd
systemctl enable systemd-networkd systemd-resolved

Then edit /etc/systemd/network/99-eth0.network to adjust the MAC if needed.

Earlier to 240121

# Quick commands
MAC="$(echo 2a:01:`openssl rand -hex 4 | sed 's/\(..\)/\1:/g; s/.$//'`)"
echo $MAC
# The following replacement only works once; edit manually thereafter
sed -ie "s/#hwaddress ether/hwaddress ether $MAC/g" /etc/network/interfaces
reboot

How to connect a USB Wi-Fi dongle?

For OneCloud, images by the author and hzytic already include common drivers, so typical USB Wi-Fi dongles are plug-and-play. For other hardware, verify driver support yourself.
1
nmtui
How to change the OneCloud front-panel LED color?

On kernel 5.9 systems, the commands green_on, red_on, bule_on, green_off, red_off, bule_off are available.

On kernel 6.x systems, control LEDs with 0/1 (off/on):
1 2 3
echo 0 > /sys/class/leds/onecloud:red:alive/brightness echo 0 > /sys/class/leds/onecloud:blue:alive/brightness echo 0 > /sys/class/leds/onecloud:green:alive/brightness

How to change the Cumebox 2 front-panel LED color?

Control LEDs with 0/1 (off/on):

echo 0 > /sys/class/leds/red/brightness
echo 0 > /sys/class/leds/blue/brightness
echo 1 > /sys/class/leds/green/brightness

After flashing the integrated image to OneCloud, LAN access is extremely slow (second-level latency). How to fix?

This rare compatibility issue (about 2%) can be fixed by changing the DTB NIC mode from "rgmii-id" to "rgmii-rxid". Reboot after changes.

dtc -I dtb -O dts /boot/dtb/meson8b-onecloud.dtb -o meson8b-onecloud.dts
nano meson8b-onecloud.dts
dtc -I dts -O dtb meson8b-onecloud.dts -o /boot/dtb/meson8b-onecloud.dtb
reboot

    pinctrl-names = "default";

    phy-handle = <&eth_phy>;
-   phy-mode = "rgmii-id";
+   phy-mode = "rgmii-rxid";

    mdio {
        compatible = "snps,dwmac-mdio";

apt update fails with time-related errors?

Check connectivity and sources first; then try changing mirrors.

If you see E: Release file for xxx is not valid yet (invalid for another 4d 3h 56min 24s). Updates for this repository will not be applied., run:
1 2
sudo apt install ntp sudo service ntp restart